Archive for the ‘Android’ Category
Wave Control Pro v1.45 Apk App
May 25th, 2012 | 
Author: 
Requirements: Android 2.2 and up
Overview: Control Your Music With a Wave of Your Hand!
Uses the proximity sensor on your phone to allow control of your music playback by waving your hand over your phone. No need to turn on your screen or even touch your phone at all!
As seen on:
*Lifehacker* http://lifehacker.com/5903676/wave-c…ver-the-screen
*Huffington Post* http://www.huffingtonpost.com/2012/0…n_1440305.html
*Pro Version*
-No Ads
-More Commands
-Assign Which Gesture Does Which Command
Coming Soon:
More Features – feel free to email any requests you have
Update the UI
Easy to use, just wave your hand over the sensor (usually located just next to the earpiece on your phone).
Holding it there will Pause/Resume
One wave across will go to the Next Song
Two waves across will go to the Previous Song
Three times (needs to be fast) will Pause or Resume the controls
*Be sure to enable Headset Button Control in your player of choice
Some Notes:
There is a little less than a second to register your waves.
Tip for the hover gesture: if you move your hand away too quickly it’ll register a wave
After an action, there is a 1 second delay before another gesture will be registered
Will work with any player that accepts headset (media button) controls
If the screen is off or another app is in focus, phone vibrates once on pause control and twice on resume controls
Practice your wave techniques by checking the “Last Action”
If you’re getting another player responding to the commands, check if that app has the option to disable headset button controls
**IMPORTANT**
I have read that the sensor will behave differently on different phones. I don’t have the resources to have a bunch of phones around to test on. If there is a problem with the app, please email me at marksthinktank@gmail.com and give me a chance to figure it out before leaving a bad review!
And… there is a chance this app may not be compatible with your phone.. sorry. I’ll do my best to keep the compatibility list up to date so future users won’t run into issues.
Permissions Needed:
Wake Lock: So it will work when the screen is off
Read Phone State: So it won’t do anything when you’re on a call
Vibrate To use when screen if off or app not in focus
What’s in this version:
V1.45: New Info Dialog, Unplug Headphone Exit now optional, bug fixes
https://play.google.com/store/apps/details?id=com.MarksThinkTank.WaveControlPro
Download:
http://1hostclick.com/s36wk10ajglj/W…v1.45.zip.html
http://turbobit.net/2h8743zmqgbf.html
Posted in 
The File Converter v2.3 Apk App
Requirements: Android 2.1+
Overview: Convert Video, Audio, Images, Documents, E-books and archives between nearly any file formats! The most complete and full-featured file converter on the market!
Files are converted in the cloud so your battery is not wasted and conversion speeds are much faster!
Convert Video, Audio, Images, Documents, E-books and archives between nearly any file formats! The most complete and full-featured file converter on the market!
Files are converted in the cloud so your battery is not wasted and conversion speeds are much faster!
Supported file types:
VIDEOS: Convert nearly any format to 3GP, 3G2, FLV, MKV, MP4, MPEG-2, OGG, WEBM, or WMV.
AUDIO: Convert nearly any audio format to MP3, OGG, WAV, WMA, AAC, FLAC, M4A, or MMF.
IMAGES: Convert nearly any format to JPG, PNG, BMP, EPS, GIF, HDR, EXR, SVG, TGA, TIFF, WBMP, or WEBP.
DOCUMENTS: Convert just about anything to PDF, DOC, TXT, ODT, FLASH, or HTML.
EBOOKS: Convert ebooks between many formats such as EPUB, MOBI, PDF, LRF, FB2, LIT, PDB, TCR.
ARCHIVES: Convert files to archives, or convert between archive formats! Supports ZIP, BZ2, 7Z, and GZ.
*Note: DRM-ed files such as some e-books or old iTunes music, along with any password-protected files such as some secure PDF’s cannot be converted.*
*Note: There is a 100 MB limit per file. You cannot convert a file larger than 100 MB*
- Extract music from MP4s of FLVs with MP4-MP3 conversion!
- YOU MUST have an internet connection to use this app. Files are uploaded to the cloud, converted, and then downloaded to your phone.
- You should install OI File Manager in order to select files directly from your phone, without it you can only select from your picture, video, and music galleries.
https://play.google.com/store/apps/details?id=com.ghostmobile.mediaconverter
Download Instructions:
http://www.mediafire.com/?cx9gsgirpo91i9x
ElectroDroid [Donate] v2.7 Apk App
Requirements: Android OS 12.6+
Overview: Powerful collection of electronics tools and reference.A must for any enthusiast
This is the Donate version of ElectroDroid (without ads)
ElectroDroid is a simple and powerful collection of electronics tools and reference; it includes:
• Resistor color code decoder (3-6 bands, with inverse look-up);
• Inductor color code decoder;
• Ohm’s law calculator;
• Reactance calculator;
• Voltage divider;
• Resistor ratio, value/series/parallel;
• Capacitor charge calculation;
• Operational amplifier;
• LED resistor calculator;
• LM317 calculator;
• Heat dissipation;
• Battery Life calculator;
• Inductor design tool;
• Voltage Drop calculator;
• PCB Trace Width calculator;
• Simple Filters calculator;
• NE555 astable calculator;
• Port pin-out (USB, Serial, Parallel, Ethernet, SCART, DVI, HDMI, S-Video, VGA, FireWire, Jack, XLR, RCA, DMX, ATX, Molex, EIDE, SATA);
• Resources (Resistivity table; Table of standard resistors and capacitors; Capacitor marking codes; AWG and SWG Wire size; Ampacity Table; Symbols and Abbreviations; Circuit Schematic Symbols; SI Units prefixes; Battery info; Boolean logic gate and algebra Theorems; 7400 info and pinout; ASCII code);
• Full support for EIA resistor series for all caluculators;
…and more to come!
What’s in this version:
• updated circuit symbols;
• fixed ampacity table;
• New resources: PT100 Conversion Table [vers. Donate];
• New pinout: SD card [vers. Donate];
• updated translations;
• New translation: Bulgarian;
• bugs fix;
Download Instructions:
http://www.mediafire.com/?q2t6r379ctuk3vg
Swype v3.26.92D.38303.t0.8611.ENSP Apk App
Requirements: Android 2.1+
Overview: Swype is a faster and easier way to input text on any screen.
Swype is a faster and easier way to input text on any screen.
With one continuous finger or stylus motion across the screen keyboard, the patented technology enables users to input words faster and easier than other data input methods – at over 40 words per minute.
The application is designed to work across a variety of devices such as phones, tablets, game consoles, kiosks, televisions, virtual screens, and more.
Swype’s underlying technology and suite of features make it faster than other keyboards.
- 40+ words per minute on touchscreen devices
- Patented Swype input algorithm with predictive tap support
- Standard QWERTY layout plus edit and numeric layers
- Swype Gestures for quick access to common actions
- Personal dictionary
- Extensive language support
- Available on many operating systems
- Integrated with 3rd party voice and handwriting solutions
Swype is faster than other text entry methods because its built-in intelligence does not require users to hit each letter accurately. Also, tracing a smooth, continuous path is much faster than “target-tap-lift-target-tap…”. Thus, novice users can quickly achieve sustained data entry speeds of over 40 words per minute. Even tapping is exceptionally fast because our Predictive Tap engine utilizes many of the concepts that make Swyping so easy and accurate.
Supported 28 languages:
EnglishUK, EnglishUS, Bulgarian, Croatian, Czech, Danish, Dutch, Estonian, Finnish,
French, FrenchCH, German, Greek, Hungarian, Italian, Korean, Norwegian, Polish,
PortuguesePT, Romanian, Russian, SerbianLA, Slovak, Slovenian,Spanish, Swedish,
Turkish, Ukrainian.
Download Instructions:
http://www.filefat.com/s8x6cabf0av2
http://depositfiles.com/files/kkg2p7u74
LED Caller ID v0.3 Apk App
Requirements: 2.2+
Overview: LED Caller ID displays caller id information on-screen in a cool LED style font when you receive a call!
LED Caller ID displays caller id information on-screen in a cool LED style font when you receive a call. It has access to lots of information about land lines, public and governmental institutions, and businesses via the http://opencnam.com database. Often when receiving a call from a wireless phone number, it will know that the caller is using a cell phone, or know what state they are in.
All-in all, it is a very handy tool. Don’t answer the phone out of blind faith! Arm yourself with knowledge. Don’t regret picking up the phone, use LED Caller ID!
This is the first release. If you have any problems, please don’t hesitate to e-mail me! I will fix them ASAP! You are my number one priority.
NOTICE!! IMPORTANT!!
LED Caller ID works best on GSM phones with UTMS, such as those distributed by T-Mobile and AT&T.
LED Caller ID _WILL_NOT_WORK_ on _CDMA_PHONES_ _WITHOUT_WIFI_TURNED_ON_, this means if you have Verizon, Sprint, or another CDMA carrier, that LED Caller ID WILL NOT display information about incoming phone calls, unless you are on WIFI.
LED Caller ID works in the following places:
American Samoa
Bermuda
Canada
Guam
Northern Marianas
Puerto Rico
Sint Maarten
USA
US Virgin Islands
What’s in this version: (Updated : May 23, 2012)
Implemented settings
Implemented vertical text position setting
Implemented retry on blank response setting
Download Instructions:
http://yfdisk.com/file/wodeaigsq/22bde34e/